Wire Feed Welders, MIG/STICK/DC TIG Capable With MVP, Multimatic, Input Voltage 120V or 230V, Input (Amps) 20A, Output Vary (Amps) 200A, OCV 90V, 50/60 Hz, Duty Cycle MIG -20 P.c or STICK/TIG – 30 P.c, single Segment, Rated Output MIG 150A at 21.5V at 20 P.c, STICK 150A at 26V at 30 P.c, TIG 150A at 16V at 30 P.c, Wire Size (In.) .023, .030, .035, Overall Height (In.) 14.5in, Overall Width (In.) 9.75, Overall Depth (In.) 14.5 Technical Specification Item Wire Feed Welders Kind MIG/STICK/DC TIG Capable With MVP Series Multimatic Input Voltage 120V or 230V Input (Amps) 20A Output Vary (Amps) 200A OCV 90V Hz 50/60 Duty Cycle MIG -20% or STICK/TIG – 30% Segment single Rated Output MIG 150A at 21.5V at 20p.cSTICK 150A at 26V at 30p.cTIG 150A at 16V at 30% Wire Size (In.) .023, .030, .035 Overall Height (In.) 14.5in Overall Width (In.) 9.75 Overall Depth (In.) 14.5 Features Miller MVP, Auto-Set Elite, Very good Arc Characteristics Even On CO2 Application MRO, Mechanical Contractors, Farm & Ranch, Education Standards CSA Includes 10 Ft Bernard Q150 MIG Gun, 13 Ft Stick Stinger, 10 Ft Work Cable W/Clamp, Smith Regulator/Flowgauge W/ 12 Ft Gas Hose, Subject material Thickness Gauge Additional Information Multiprocess Welders Miller Multimatic 200 Lightweight (29 lb.), 120 and 230V power supply adapts easily to MIG, TIG, or stick weld work locations. Auto-Set Elite simplifies fine-tuning settings for more than one materials and processes. Includes 120 and 230V plugs, MIG gun, lead with electrode holder and Dinse connector, work lead with clamp and Dinse connector, 4 contact tips, dual-groove fast-change drive rolls, argon mix regulator drift gauge with hose, and thickness gauge.